Somos responsáveis pela construção----- somos responsáveis pelo fabrico----- somos responsáveis pela formação
ATM fascias, vending bodies, parcel lockers and ticket terminals — dense cut-outs, a cosmetic front face that cannot be touched, and a design that changes every model year.
A kiosk enclosure is a cosmetic box full of holes. The front fascia carries cut-outs for a screen, a card reader, a printer, a keypad, a scanner and a cash or parcel aperture — each with a positional tolerance set by a bought-in module, not by your drawing. Body panels, doors and locker cells are then folded from 1.0 to 2.0 mm coated or stainless sheet, and the visible surface is a product feature the end customer looks at from thirty centimetres away.
Three capabilities follow. Tooling-free cut-outs, because module suppliers change footprints between generations and a die order cannot keep up: a turret punch produces repeating fixing and ventilation patterns, and a laser cuts the bespoke apertures. Positional accuracy of ±0.1 mm, so a bezel sits square against a screen without packing. And non-contact handling, because a scratch on a fascia is scrap at full value — vacuum pick-up moves the blank in the air and protective film stays on through forming.
STON CNC (Qingdao Ston Mechanical Technology Co., Ltd.) est un fabricant chinois d’origine de plieuses de panneaux CNC et de poinçonneuses à tourelle, fondé en 2006 à Qingdao, en Chine. Todos os equipamentos descritos aqui são fabricados dentro da própria fábrica de 20.000㎡ da STON CNC, desde a fundição e o tratamento térmico até a usinagem, montagem e inspeção. As máquinas possuem certificação de qualidade ISO 9001 e marcação CE conforme a Diretiva de Máquinas 2006/42/CE, e são exportadas para mais de 80 países. Ver certificações e patentes →
Terminal enclosures divide into cosmetic front panels where cut-out accuracy and finish dominate, and structural bodies where four-sided folding and repetition dominate. Both sit in the same cell.
Screen, reader, printer and scanner footprints are defined by module suppliers who revise them on their own schedule. Any process that needs a dedicated die per aperture cannot follow. Turret punching for repeating fixing and ventilation patterns, plus laser cutting for bespoke apertures, means a module change is a program edit rather than a tooling order.
The front panel is the most expensive sheet metal part in the unit by the time it is coated, and it is the part a customer looks at closely. Handling damage cannot be polished out of a powder-coated or brushed fascia. Vacuum pick-up with a patented 360° rotating feeder keeps the visible face out of contact from blank to stack, with protective film retained through forming.
A locker bank is dozens of identical cells in a body that changes with every site. The cells reward automation and repetition; the body rewards changeover speed. Configuring for only one of the two is the most common mistake we see in this sector.
Fascia-led products and locker-led products pull the configuration in different directions. Most manufacturers make both, so the cell has to serve both.
Terminal enclosures usually sit inside the forming window, with two exceptions worth checking early: heavy outdoor plinths and small bezel components.
| Parâmetro | Dobradeira de painéis | Turret punch | Notas |
|---|---|---|---|
| Typical enclosure gauge | 1.0–2.0 mm | 1.0–2.0 mm | Bem abaixo da capacidade |
| Cold-rolled / coated max | ≤2.0 mm cast / ≤1.5 mm welded | Set by tonnage and tool | Heavy plinths may exceed this |
| Aço inoxidável (máx.) | ≤1.2 mm cast / ≤1.0 mm welded | Set by tonnage | For outdoor and vandal-resistant units |
| Dimensão máxima de conformação | up to 2800 × 1500 mm | X 2500 mm, secondary to 5000 mm | Por modelo |
| Dimensão interna mínima dos quatro lados | aprox. 140 × 190 mm | — | Small bezels check here |
| Positional accuracy of cut-outs | — | ±0.1 mm | Repeatability approx. ±0.01–0.02 mm |
| Precisão angular | aprox. ±0,5°/m | — | Decides fascia fit against the body |
| Straightness | approx. 0.2 mm/m | — | Decides door and seal alignment |
| Surface handling | Vacuum pick-up and brush composite table — no contact with the cosmetic face | Film retained | |
| Serviços públicos | Trifásico, 380 V, ar a 0,6 MPa | 380 V ±5%, 0.55 MPa air | Configurado para a tensão de destino |
Four-sided fascias, bodies, doors and locker cells in 1.0–2.0 mm with dense module cut-outs and a cosmetic visible face. Tooling-free punching plus non-contact handling is exactly the combination this sector needs.
Deep-drawn housings, extruded frame profiles, roll-formed structural members, small bezel components below the minimum four-sided forming size, and heavy plinths above 2.0 mm at full bend length.
Base plinths in heavier gauge, anchoring plates, vandal-resistant reinforcement and prototype fascias. A press brake alongside the cell handles all of these without disrupting volume work.
Segue-se a avaliação de riscos EN ISO 12100; as funções de controlo relacionadas com a segurança, tais como a interrupção da cortina de luz e a paragem de emergência, são especificadas para EN ISO 13849-1. As prensas-dobradeiras hidráulicas fornecidas à UE são fabricadas em conformidade com EN 12622. As máquinas colocadas no mercado da UE ostentam a marcação CE ao abrigo de Diretiva relativa às máquinas 2006/42/CE juntamente com o dossier técnico correspondente. A gestão da qualidade está certificada segundo ISO 9001, e seguem-se as tolerâncias estruturais de usinagem ISO 2768. For outdoor and semi-outdoor terminals, IEC 60529 defines the IP code the enclosure is tested against, and structural elements are commonly designed to EN 1993-1-1. Both apply to your product rather than the machine — but the panel straightness and angle consistency an ingress test depends on are established at the forming stage.
Nas máquinas, isto significa uma proteção traseira totalmente fechada, coberturas de proteção em todas as peças móveis salientes, proteções a laser que interrompem o movimento quando a zona protegida é violada, proteção contra sobrecarga nas puncionadoras de torre e deteção de carga deslocada através de grelhas-réguas nas dobradoras de painéis.
Fascia panels are the clearest case in sheet metal for a combined machine, because a single panel carries both repeating patterns and bespoke apertures.
| Fiber laser | CNC turret punch | Punch-laser combined | |
|---|---|---|---|
| Bespoke module apertures | Best — no tooling | Limited to tooling | Good |
| Repeating fixing and vent patterns | Pierces each hole | Fastest | Fastest |
| Both on the same panel | Two setups or slow | Two setups | One clamping |
| Thread preparation and ribs | No | Sim | Sim |
| Positional accuracy between features | Good within one nest | ±0.1 mm | No re-clamping error |
| Floor space | Moderate | Moderate | approx. 40% less than both |
| Ideal para | Prototypes and short runs | Locker cells and repeat bodies | Fascias with mixed features |
| A STON fornece isso? | Sim | Sim | Sim |
Where a fascia carries a screen aperture, a card reader window and a ventilation array on one panel, a combined machine removes the re-clamping between them — which is exactly where positional error between a bezel and its module normally comes from.
As figuras abaixo descrevem a direção e o mecanismo da alteração. Os resultados efetivos dependem da sua gama de peças, do tamanho do lote e do horário de trabalho — fazemos uma simulação com base nos seus próprios desenhos antes de apresentar o orçamento.
| Artigo | Laser plus press brakes | Punch and bend cell |
|---|---|---|
| Fascia with mixed features | Two setups, re-clamping error | One clamping |
| Bezel-to-module fit | Packing and adjustment at assembly | ±0.1 mm positional accuracy |
| Cosmetic face damage | Handling at every stage | No contact, film retained |
| Locker cell repetition | Ao ritmo do operador | Automatic loading and stacking |
| New module footprint | Re-nesting and re-proving | Program edit |
| Changeover between models | Troca de ferramentas e reajuste dos calibres | Program recall |
| Heavy plinths above 2 mm | Handled | Stay on the press brake |
Lógica de retorno do investimento que utilizamos com os clientes: (mão-de-obra poupada anualmente + redução do retrabalho e do desperdício + produção comercializável adicional) ÷ custo do equipamento instalado. Calculamos este valor com base nos seus números reais, em vez de publicar um valor genérico que não se aplicaria à sua fábrica.
Module apertures, fixing patterns and ventilation on one fascia in a single clamping — no re-clamping error between a bezel and its screen cut-out. Roughly 40% less floor space than two separate machines.
View SFL series →
Vacuum-gripped feeding for coated and filmed cosmetic panels, patented 360° rotating suction feeder, cast-iron frame to 2.0 mm cold-rolled. Cabinet air conditioning for constant-temperature electrics.
Ver o tipo de ventosa →
Locker cell fixing patterns, ventilation arrays and thread preparation at volume. ±0.1 mm accuracy, turret speed to 40 rpm, brush and steel-ball composite table that carries coated panels without scoring.
Ver a série SF →
Tooling-free cutting for new module footprints, prototypes and site-specific variants. Exchange table loads the next sheet while cutting, with burr-free edges on coated and stainless sheet.
Ver unidade de laser →
On cosmetic fascias, automation is justified by scrap before labour. Native interface on every panel bender, vacuum pick-up that never touches the visible face, compatible with most robot brands.
Ver sistema de treliças →
Base plinths, anchoring plates and vandal-resistant reinforcement outside the panel bender window. 63 t to 320 t, DELEM or ESA control, laser protection device.
View PBS series →Founded in 2006 and headquartered in Qingdao, one hour from major export ports and the airport. Casting, heat treatment, machining, welding, assembly and inspection all happen inside our own 20,000㎡ factory. That is why a configuration change for a terminal enclosure cell does not become a six-month subcontracting problem.
Terminal rollouts are scheduled site by site, and a delayed batch of fascias delays installation crews rather than a warehouse. Response time and spare parts availability belong in the purchase decision.
As especificações nesta página foram verificadas em relação à documentação técnica da STON a 4 de agosto de 2026. Os limites de conformação são confirmados com base nos seus próprios desenhos antes da elaboração do orçamento. Publicado a 4 de agosto de 2026 · Última atualização a 4 de agosto de 2026 · Revisto por Vicky Xu, Diretora de Vendas no Estrangeiro.
The fascia is the hardest part in the product and the one that decides the machine list. Send it with your locker cell and your heaviest plinth and we return a configuration within 24 hours.
Prefere falar primeiro?
WhatsApp: +86 18153226091
Correio eletrónico: [email protected]
Envie os seus requisitos através do nosso formulário de contacto seguro. A nossa equipa responderá no prazo de 24 horas.
Quer esteja a atualizar uma linha existente ou a iniciar um novo projeto, a STON personalizará uma solução CNC para a sua produção.
