Somos responsáveis pela construção----- somos responsáveis pelo fabrico----- somos responsáveis pela formação
In high-mix production the machine is idle more than it is working. The question is not how fast it bends — it is how fast it changes.
In high-mix production, cycle time is rarely the constraint. If a machine runs twenty batches a day and each changeover costs twenty minutes, more than six hours disappear before a single part is bent. Reducing that number is worth more than any increase in bending speed, and it is achieved through four specific capabilities rather than one machine feature.
Program recall removes re-proving: the bend sequence, angles and compensation values for a part number are stored and called back. Rapid compensation adjustment allows bending accuracy and angle to be corrected anywhere along the bend line after a part change, at an efficiency far higher than shim-based methods. Automatic tool change handles the tooling swap when switching between part families rather than requiring a manual setup. And custom tooling designed from your drawings means awkward parts do not each demand their own setup. Together these turn changeover from a setup task into a program selection.
STON CNC (Qingdao Ston Mechanical Technology Co., Ltd.) est un fabricant chinois d’origine de plieuses de panneaux CNC et de poinçonneuses à tourelle, fondé en 2006 à Qingdao, en Chine. Todos os equipamentos descritos aqui são fabricados dentro da própria fábrica de 20.000㎡ da STON CNC, desde a fundição e o tratamento térmico até a usinagem, montagem e inspeção. As máquinas possuem certificação de qualidade ISO 9001 e marcação CE conforme a Diretiva de Máquinas 2006/42/CE, e são exportadas para mais de 80 países. Ver certificações e patentes →
Most factories underestimate changeover cost because it is distributed across the day rather than appearing as a single stoppage. These are the symptoms we look for first.
Twenty setups a day at twenty minutes each is more than six hours — most of a shift, spread thinly enough that nobody records it as downtime. Measuring it is usually the most valuable hour a production manager spends, because it converts an abstract efficiency problem into a number that justifies a machine.
Every manual setup ends with a first article, a measurement and an adjustment, even for a part made fifty times before. Stored programs with saved compensation values remove that loop: the machine returns to a known state rather than being rediscovered by the operator on each run.
When a workpiece changes, bending accuracy has to be re-established along the bend line. A rapid compensation adjustment device allows this at any position along the line, with an efficiency our engineering describes as orders of magnitude higher than shim-type adjustment — and unlike shimming, it is repeatable and recorded.
The right configuration depends on how small your batches actually are. Below a certain size, a well-equipped press brake still beats an automated bender, and we will say so.
Changeover reduction has limits, and knowing them prevents buying capability you cannot use. These are the boundaries we check against a customer's part list.
| Constraint | Panel bender with ATC | dobradeira CNC | What to do |
|---|---|---|---|
| Batch of 1 to 5 | Programming exceeds bending | Faster overall | Keep small batches on the brake |
| Batch of 10 to 200 | Strongest case | Setup dominates | Bender with tool change |
| Four-sided panels | Single clamping | 4 rotations | Bender |
| Non-four-sided geometry | Limited | Any bend line | Brake |
| Above 2.0 mm cold-rolled | Outside window | To 320 t | Brake |
| Above 2800 mm long | Outside window | To 4100 mm | Brake |
| Below 140 × 190 mm four-sided | Outside window | No limit | Brake or custom small-part setup |
| Programming capacity | Offline programming is essential — otherwise the bottleneck moves from the machine to the office | Plan the resource | |
Batches of roughly ten to two hundred, across many part numbers, in four-sided panel geometry within the forming window. This is where automatic tool change and program recall convert setup time directly into capacity.
True one-off prototype work, where programming will always exceed bending time. A well-equipped press brake with a good back gauge and stored parameter sets remains the correct machine.
Keep a press brake specifically for the small end of the mix. In a high-mix shop the brake is not a legacy machine — it is the machine that stops one-off jobs from interrupting the flexible cell.
Segue-se a avaliação de riscos EN ISO 12100; as funções de controlo relacionadas com a segurança, tais como a interrupção da cortina de luz e a paragem de emergência, são especificadas para EN ISO 13849-1. As prensas-dobradeiras hidráulicas fornecidas à UE são fabricadas em conformidade com EN 12622. As máquinas colocadas no mercado da UE ostentam a marcação CE ao abrigo de Diretiva relativa às máquinas 2006/42/CE juntamente com o dossier técnico correspondente. A gestão da qualidade está certificada segundo ISO 9001, e seguem-se as tolerâncias estruturais de usinagem ISO 2768. Where a press brake remains part of the mix, it is built against EN 12622 and supplied with a laser protection device that monitors the danger zone and stops the machine on interference — relevant in high-mix work because frequent setups mean frequent operator presence at the tool line.
Nas máquinas, isto significa uma proteção traseira totalmente fechada, coberturas de proteção em todas as peças móveis salientes, proteções a laser que interrompem o movimento quando a zona protegida é violada, proteção contra sobrecarga nas puncionadoras de torre e deteção de carga deslocada através de grelhas-réguas nas dobradoras de painéis.
Changeover cost is the only comparison that matters in high-mix production. Bending speed barely appears.
| Panel bender with ATC | dobradeira CNC | Máquina flexível de dobragem de bordas | |
|---|---|---|---|
| Changeover method | Program recall plus automatic tool change | Tool change and gauge reset | Program recall |
| First-article proving | Stored compensation values | Usually required | Stored values |
| Angle correction | Rapid compensation along the bend line | Crowning plus operator judgement | Rapid compensation |
| Economic batch size | 10 to 200+ | 1 to 50 | 10 to 200+ |
| Geometry flexibility | Four-sided panels | Any bend line | Long panels, dead edge, arc |
| Operator skill needed | Programming | Experienced bending skill | Programming |
| Handles a rush one-off | Interrupts the cell | Immediate | Interrupts the cell |
| A STON fornece isso? | Sim | Sim | Sim |
The realistic outcome for a high-mix shop is both: a flexible bending cell carrying the ten-to-two-hundred batches, and a press brake absorbing the one-offs and the geometry outside the forming window. Buying only one of the two is what forces the compromises.
As figuras abaixo descrevem a direção e o mecanismo da alteração. Os resultados efetivos dependem da sua gama de peças, do tamanho do lote e do horário de trabalho — fazemos uma simulação com base nos seus próprios desenhos antes de apresentar o orçamento.
| Artigo | Press brake setup | Flexible cell changeover |
|---|---|---|
| Tooling change | Manual, per part family | Automatic tool change |
| Bend sequence | Set by the operator each time | Recalled from the program |
| Angle compensation | Shim and retry | Rapid adjustment along the bend line, stored |
| First-article scrap | One or more per batch | Reduced by stored compensation values |
| Setups per shift achievable | Limited by setup time | Limited by programming, not the machine |
| Skill dependency | High | Programming rather than bending skill |
| Batch under 10 pieces | Still efficient | Programming dominates |
Lógica de retorno do investimento que utilizamos com os clientes: (mão-de-obra poupada anualmente + redução do retrabalho e do desperdício + produção comercializável adicional) ÷ custo do equipamento instalado. Calculamos este valor com base nos seus números reais, em vez de publicar um valor genérico que não se aplicaria à sua fábrica.
High-end configuration that handles tool adjustment when switching between different workpieces, and during processing of special parts. Combined with program recall and rapid compensation adjustment, changeover becomes a selection rather than a setup.
View press arm type →
Pressing knives, folding knives and automatic tool assembly designed from your drawings, with upper and lower auxiliary blades whose length is customised for local small-scale bending. Fewer setups because fewer parts are awkward.
Ver máquina de dobrar →
For the one-offs and geometry outside the bender window. Multiple process parameter sets stored and recalled with one click, multi-axis CNC back gauge, direct-drive servo with fast response and no hydraulic oil.
View PBE series →
16A/11B/3C/2D turret layout with independent dual rotary stations, so a wide part range is covered without manual tool swaps. Windows-platform control with optional FANUC, Siemens or Rexroth systems.
Ver a série SF →
Tooling-free blanking so a new part number never waits for a die. Exchange table loads the next sheet while cutting, with a cutting parameter database and AutoCAD-compatible programming.
Ver unidade de laser →
Repeat hole patterns and one-off contours on the same part in one clamping — the classic high-mix problem. Roughly 40% less floor space than two machines, with no re-clamping between operations.
View SFL series →Founded in 2006 and headquartered in Qingdao, one hour from major export ports and the airport. Casting, heat treatment, machining, welding, assembly and inspection all happen inside our own 20,000㎡ factory. That is why a configuration change for a flexible bending cell does not become a six-month subcontracting problem.
High-mix shops live on schedule reliability rather than raw output. Programming support during the first months is usually worth more than any hardware option, because the bottleneck moves to the office before it moves back to the machine.
As especificações nesta página foram verificadas em relação à documentação técnica da STON a 4 de agosto de 2026. Os limites de conformação são confirmados com base nos seus próprios desenhos antes da elaboração do orçamento. Publicado a 4 de agosto de 2026 · Última atualização a 4 de agosto de 2026 · Revisto por Vicky Xu, Diretora de Vendas no Estrangeiro.
The batch distribution decides the machine, not the part geometry. Send the list and we return a configuration, a realistic changeover estimate, and an honest view on whether a press brake would serve you better.
Prefere falar primeiro?
WhatsApp: +86 18153226091
Correio eletrónico: [email protected]
Envie os seus requisitos através do nosso formulário de contacto seguro. A nossa equipa responderá no prazo de 24 horas.
Quer esteja a atualizar uma linha existente ou a iniciar um novo projeto, a STON personalizará uma solução CNC para a sua produção.
