Somos responsables de la construcción-----somos responsables de la fabricación-----somos responsables de la formación
A press arm panel bender is worth evaluating when a blank offers a usable mechanical clamping area but limited space for vacuum sealing. A suction cup panel bender is worth evaluating when the blank provides suitable sealing areas for stable vacuum handling. Neither choice can be confirmed from material thickness alone: gripping access, holes, surface condition and clearance throughout the bend sequence must also be checked.
Noticias del sector
Compara los fabricantes de punzonadoras de torreta en función del número de estaciones, el tipo de accionamiento, el conformado, las herramientas y el plazo de entrega de las piezas, con los datos de STON JT, SF y SFL.
Noticias del sector
Una hoja de ruta por etapas para la automatización del procesamiento de chapa: empieza por la carga y descarga, añade el plegado automatizado y, a continuación, conecta toda la línea. Incluye especificaciones, costes y errores habituales.
Noticias del sector
A ventilation panel punching machine uses a CNC turret to stamp louvres, slots and grille patterns. See why hit rate beats laser cutting on hole-dense panels, with spec data and tooling logic.
Seguir leyendo
Panel benders rated for cold-rolled steel don't bend stainless the same way. On STON's Press Arm Type line, the full-bend ceiling drops to SS 1.0mm on welded-frame models and SS 1.2mm on cast-frame models — well below the CR 1.5–2.0mm figures most spec sheets lead with.
Seguir leyendo
A metal enclosure production line links uncoiling, leveling, laser cutting or turret punching, and automatic bending into one coil-fed system. Sizing one starts with your enclosure's wall thickness and coil width, not the machine catalog — then floor space, cycle time, and shift output follow from those two numbers.
Seguir leyendo
A filing cabinet body and drawer front can go from flat coil steel to a bent, punched shell in one continuous automated sequence — uncoiling, leveling, laser cutting, punching, and bending — without the part being set down and re-picked between stations, which is where most consistency loss happens on manual lines.
Seguir leyendoTanto si está actualizando una línea existente como si está iniciando un nuevo proyecto, STON personalizará una solución CNC para su producción.
