Siamo responsabili della costruzione----- siamo responsabili della produzione----- siamo responsabili della formazione
A press arm panel bender is worth evaluating when a blank offers a usable mechanical clamping area but limited space for vacuum sealing. A suction cup panel bender is worth evaluating when the blank provides suitable sealing areas for stable vacuum handling. Neither choice can be confirmed from material thickness alone: gripping access, holes, surface condition and clearance throughout the bend sequence must also be checked.
Notizie sul settore
Confronta i produttori di punzonatrici a torretta in base al numero di stazioni, al tipo di azionamento, alla formatura, agli utensili e ai tempi di consegna dei componenti, utilizzando i dati relativi ai modelli STON JT, SF e SFL.
Notizie sul settore
A staged roadmap for sheet metal automation — start with loading and unloading, add automated bending, then connect the full line. Includes specs, costs, and common mistakes.
Notizie sul settore
A ventilation panel punching machine uses a CNC turret to stamp louvres, slots and grille patterns. See why hit rate beats laser cutting on hole-dense panels, with spec data and tooling logic.
Per saperne di più
Panel benders rated for cold-rolled steel don't bend stainless the same way. On STON's Press Arm Type line, the full-bend ceiling drops to SS 1.0mm on welded-frame models and SS 1.2mm on cast-frame models — well below the CR 1.5–2.0mm figures most spec sheets lead with.
Per saperne di più
A metal enclosure production line links uncoiling, leveling, laser cutting or turret punching, and automatic bending into one coil-fed system. Sizing one starts with your enclosure's wall thickness and coil width, not the machine catalog — then floor space, cycle time, and shift output follow from those two numbers.
Per saperne di più
A filing cabinet body and drawer front can go from flat coil steel to a bent, punched shell in one continuous automated sequence — uncoiling, leveling, laser cutting, punching, and bending — without the part being set down and re-picked between stations, which is where most consistency loss happens on manual lines.
Per saperne di piùSia che stiate aggiornando una linea esistente o iniziando un nuovo progetto, STON personalizzerà una soluzione CNC per la vostra produzione.
